Hammerite Metal Paint - Smooth Finish Durable, corrosion resistant decorative coating for ferrous and non-ferrous metals, certain plastics and wood. This is a brilliant gloss finish which will retain its sheen for years. Key information Coverage Brush: 4.5 sq m per litre - 2 coats Aerosol: approx. 0.5 sq m per 400ml can Touch dry Dependent upon temperature / humidity Recoatable This is a 2 coating system. Ensure no more than 3 hours between coats. Final coat should be applied thick enough to flow to a gloss finish Pack sizes 400ml aerosol, 0.25L, 0.5L, 0.75L, 1L, 2.5L & 5L Location Interior, Exterior Application Brush, Roller Key benefits Can be applied directly onto rusty metal. No need for primer or undercoat. Corrosion resistant. Hammerite forms a superior barrier that not only seals out moisture but gives long lasting protection both inside and outside. System information For the best results makes sure all surfaces must be dry and free from dirt, dust, grease and salt. After suitable preparation apply 1 or 2 coats of Hammerite Metal Paint. After use, clean equipment with Hammerite Brush Cleaner and Thinners.